014-1065-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Accessoires en losse onderdelen-Pneumatische membraampompen Burst druk 1000 bar

Burst druk 1000 bar

The follower plate is pushed down by the pressurised pneumatic cylinders

These pumps are advised for the transfer of medium-high viscosity oil (SAE 15/240) and anti-freeze

Met deze lucht verzorging set kunt u de uitgaande druk regelen om zo optimaal gebruik te kunnen maken van u oliepomp

It keeps the pump in vertical position in order to assure a perfect working

014-1065-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Accessoires en losse onderdelen-Pneumatische membraampompen Burst druk 1000 barIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.