Dinghy Boomstrut Emergency Response Boat Optimized hull design

Optimized hull design

The hull shape is especially important as it can get a large load on the plane as well as give the pilot unsurpassed manoeuvrabilty in various and dangerous conditions

Width W: 19mm Height: 24mm Width X: 11mm Fastenings Ø: 5mm Fastening centres: 100mm Plunger hole centres: 50mm Weight: 479 g per M

It is the only craft of its type that has actually been used in combat in different theatres and comes through with flying colors

0m (36ft) (Size 2 = 900mm for yachts up to 9

Dinghy Boomstrut Emergency Response Boat Optimized hull designThe Barton Dinghy Boomstrut is designed for sailboats under 5 metres (17) with boom and sail tip weight of under 6. 8 kgs(16 lbs). We recommend, after reading the instructions fully, that you should install the complete system, then determine if the rods require cutting. This would mean the boom position may not be correct but will allow you to measure the downward force required (with sail flaked) on the aft end of the boom to flex the rods.