Bulk #8-16 Phillips Flat Head 48-2 Thread-Forming Screws for Thermoplastics – 18-8 Stainless Steel, Passivated & Wax-Lubed Length:2000 Qty - #8-16 x 1-1/2" Drive: Internal 6-lobe (Torx T8)

Drive: Internal 6-lobe (Torx T8) resists cam-out and transfers higher torque than Phillips or slotted drives

Available Sizes: 1/4"-20 to 1-3/8"-6 in UNC

Bulk External Tooth Keps K-Lock Hex Locknuts – Steel Zinc CR+3 (US Inch Sizes)

Diameter: 7/8"

Corrosion Resistance: Made from stainless steel A2 (18-8) for excellent rust resistance

Bulk #8-16 Phillips Flat Head 48-2 Thread-Forming Screws for Thermoplastics – 18-8 Stainless Steel, Passivated & Wax-Lubed Length:2000 Qty - #8-16 x 1-1/2" Drive: Internal 6-lobe (Torx T8)Monster Overview: Boost thermoplastic assemblies with #8 16 Phillips Flat Head 48 2 Thread Forming Screws in corrosion proof 18 8 (304) stainless steel. The Plastite alternative tri lobular flank plastically flows plastic, producing chip free internal threadsno pre tapping, no debris. Each screw is passivated to ASTM A967 and factory wax lubed for repeatably low seating torque. Bulk master cartons slash per unit cost for high volume lines. Monster