014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Mobiele ontvetterbak subject to the requirements of

subject to the requirements of the application

These pumps are advised for the transfer of low - medium viscosity oil (SAE 15/130)

The control unit JMCO can manage until to 4 dispensing points with 4 different products

Met deze lucht verzorging set kunt u de uitgaande druk regelen om zo optimaal gebruik te kunnen maken van u oliepomp

åÊ

014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Mobiele ontvetterbak subject to the requirements ofIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.