Lossingsmiddel Spray Achem SG-1008S, Trennmittel full properties after a post-cure

full properties after a post-cure of 16 hours at 60°C or 7 days at room temperature

Recommended storage temperature is between 10°C and 35°C

typically between 1 and 15 percent relative to the silicone mixture

Cartridge capacity: 1500mL

000 cSt version and the filler content is higher

Lossingsmiddel Spray Achem SG-1008S, Trennmittel full properties after a post-cureThis wax based release spray is ideal for the treatment of surfaces which are (slightly) porous or whereby the possibility exists that silicones might adhere (mechanically or chemically). The spray can also be applied to the silicone mold itself to facilitate silicone molds made from multiple silicone parts or to release castings from the silicone mold. This spray gives a slightly harder result as the Achem 3007 S Easy spraying action Good release Not